
S355JR Hot Rolled Steel Plate
S355JR hot rolled steel plate is a non-alloy structural steel grade engineered to deliver a minimum yield strength of 355 MPa for high-load industrial frameworks and heavy machinery, maintaining uniform grain structures and strict thickness tolerances from 6 mm to 150 mm for dependable weldability and structural integrity.
|
|
|
|
|
EN 10025-2 non-alloy structural steel |
|
|
6 mm to 150 mm |
|
|
1,500 mm, 2,000 mm, 2,500 mm (Customizable up to 3,000 mm) |
|
|
Up to 12,000 mm or custom cut-to-length (up to 16,000 mm) |
|
|
|
|
|
Mill edge or plasma-cut square edge |
Minimum 355 MPa for thicknesses less than or equal to 16 mm; decreasing incrementally for greater thicknesses per standard specifications.
Ranges from 470 MPa to 630 MPa depending on nominal plate thickness.
Minimum 22% (transversal) and 26% (longitudinal) measured on a standard gauge length.
Guaranteed minimum impact energy of 27 J tested at +20℃ in accordance with JR designation criteria.
Typically ranges between 130 HBW and 170 HBW, facilitating efficient machining and drilling operations.
Carbon max 0.24%, Manganese max 1.60%, Silicon max 0.55%, Phosphorus max 0.035%, Sulfur max 0.035%.
Maintained below 0.45% using standard calculation formulas for safe preheat-free welding.
Fully interchangeable with ASTM A572 Grade 50, JIS SM490YB, and ISO Fe570D.
Sourcing low-impurity continuous-cast slabs with verified metallurgical ladle analysis reports.
Slabs heated in walking-beam furnaces to 1,200℃ followed by high-pressure hydraulic scale removal.
Precision hot rolling through multi-stand finishing mills to establish exact final thickness and fine-grain microstructure.
Laminar water cooling applied on the run-out table, followed by hot leveling via multi-roll precision levelers.
Structural chassis and base plates for earthmoving equipment, excavators, and industrial cranes.
Load-bearing columns, girders, and welded assemblies for industrial buildings and warehouses.
Web plates, flange plates, and structural gussets utilized in highway and railway bridge frameworks.
Base rings for wind turbine towers, transformer tanks, and heavy-duty structural support skids.
Automated laser thickness scanning and manual caliper checks across length and width coordinates.
Internal soundness verified via automated pulse-echo ultrasonic testing complying with EN 10160 standards.
Tensile, bending, and Charpy V-notch impact tests performed on coupons extracted from each heat lot.
Stamped heat numbers and steel grades linked directly to generated EN 10204 3.1 Mill Test Certificates.
Widths cut from 1,000 mm up to 3,000 mm; lengths custom-sheared from 2,000 mm to 16,000 mm.
CNC oxy-fuel and high-definition plasma cutting of complex geometric shapes, rings, and gusset plates from CAD drawings.
Mechanical beveling, J-groove edge preparation, and root face machining ready for direct welding assembly.
Shot blasting to Sa 2.5 cleanliness followed by application of weldable shop primers.
Heavy plates stacked securely into stable bundles ranging from 3 to 5 metric tons using steel strapping.
Wood dunnage spacers placed between plates to prevent surface scratching and facilitate crane handling.
Application of temporary anti-rust oil or weather-resistant interleaving paper for ocean transport.
Lashing inside 20-foot dry containers for smaller orders, or break-bulk vessel stowage for full mill shipments.
A: Single plate weight capacity extends up to 12 metric tons, limited primarily by transportation vehicle axle load limits.
A: Every shipment includes original EN 10204 3.1 Mill Test Certificates detailing exact chemical and mechanical test results.
A: Thickness tolerances conform strictly to EN 10029 Class A or Class B standards, depending on customer specifications.
A: For plate thicknesses up to 30 mm with carbon equivalents below 0.45%, preheating is generally unnecessary under normal ambient conditions.
Q: Can plates be supplied with third-party inspection?
A: Independent inspection by recognized agencies such as SGS, BV, or DNV can be arranged prior to dispatch.
תגיות פופולריות: s355jr hot rolled steel plate, China s355jr hot rolled steel plate manufacturers, suppliers, factory
אולי גם תרצה
שלח החקירה











